3.3 Connection Using the Discrete-wire Connector
No discrete-wire connector is provided with the unit. Purchase it separately.
3.3.1 Specifications of Wire-pressed Terminal Cable
This is a connector allowing loose wires to be connected without removing the wire's insulation.
A pressure connection tool is required to connect the loose wires.
Connector for wire-pressed terminal cable (40P)
■
Suitable wires (strand wire)
Size
AWG22
AWG24
■
Connector AFP2801 for wire-pressed terminal cable (provided with unit)
Composition of parts
Housing (40P)
Semi-cover (40P)
5-pin contact (for AWG22 and 24)
(Note 1)
One set is provided for the product. If you need more connectors, purchase AFP2801 (2 sets/pack).
■
Dedicated pressure welding tool
Product no.
WUME-FP7MXY-06
3.3 Connection Using the Discrete-wire Connector
Nominal cross-sectional
area
2
0.3 mm
2
0.2 mm
AXY52000FP
Insulation thickness
Φ1.5 to Φ1.1
Required quantity
1 x 1 set
2 x 1 set
8 x 1 set
Rated current
3A
3-11