Lamp Burner Blower Fan 9 Removal; Lamp House Removal - Barco RLM G5 Performer Service Manual

8.11.1.2 Lamp burner blower FAN 9 removal

How to remove the lamp burner blower FAN 9
1. Remove the 2 screws (A) securing the blower to the lamp house. (image 8-38)
2. Remove the blower out of the base plate.
Image 8-38
FAN 9 removal

8.11.1.3 Lamp House removal

How to remove the lamp house
1. Remove the 3 screws (A) securing left side of the lamp house to the base plate. (image 8-39)
2. Remove the 2 screws (A) securing rear side of the lamp house to the base plate (image 8-39).
3. Move the lamp house upwards to remove from projector frame (Access to rear fan on lamp house). (image 8-40)
Image 8-39
Lamp house removal
Image 8-40
Access to rear fan on lamp house
R5976766 RLM G5 22/04/2004
8. Module/Unit Identification
43