Closing Off The Light Processor Compartment - Barco ZEUS Installation And Safety Manual

12.5 Closing off the Light Processor compartment

Necessary tools
• 7mm flat screwdriver.
• 3mm Allen wrench.
How to close off the Light Processor compartment?
1. Place the fan on top of the Light Processor in the lower position . Ensure that the four mounting pins (reference 1 image 12-11)
of the fan assembly are engaged.
Caution: Take care of the wire.
Image 12-11
2. Install the top cover plate of the Light Processor compartment. See page 150.
3. Install the side cover plate of the Light Processor compartment. See page 149.
4. Install the top cover of the projector. See page 153.
5. Install the left side cover of the projector. See page 152.
6. Switch on the projector.
7. Clear the security warning. See procedure page 140.
R5905961 ZEUS 09/03/2015
12. Convergence
1
99