Table of Contents
Advertisement
27. Maintenance
Image 27-23
Loosening the spacer screws
2. Using the provided handle (B), pull the lamp unit out of the projector frame.
Image 27-24
Sliding out the lamp housing
Caution:
Be careful not to drop the lamp unit (see safety instructions in front of instruction manual)
27.3.4 Inserting the new lamp Unit
27.3.4.1 Installation of the new Lamp Unit.
What has to be done
First remove the lock nut on each spacer screw and next slide the lamp unit into the projector frame.
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
Installing the lamp unit
1. Remove the lock nut (B) on the 3 spacer screws (A).
194
A
A
B
A
B
R5976820 SLM R12+ PERFORMER 08/03/2005
Advertisement
Table of Contents
