Network Port Requirements For The Tx9000 And Tx9200 - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

Network Port Requirements For the TX9000 and TX9200

Figure 2-4 Option 2: 2' x 2' (0.61 m x 0.61 m) Recessed Indirect Lighting Fixtures
Table 2-9
Callout
1

Network Port Requirements For the TX9000 and TX9200

The TX9000 and TX9200 require a single Gigabit Ethernet port (RJ-45 UTP) installed on the wall
behind the system. This port connects the CTS primary codec (TS1), which is the main interface between
the CTS endpoint and the network, to the network infrastructure.
The CTS primary codec and participant convenience port connectivity options are listed in
Table 2-10
Options
CTS Codec (Required)
Option 1 for Participant Convenience Ports
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
2-10
1
Callouts for Figure 2-4
Description
Ceiling-installed 2' x 2' (0.61 m x 0.61 m) recessed indirect lighting fixtures
TX9000 Network Access Requirements
# of Ports
1
1
Chapter 2 Room Requirements for the TX9000 and TX9200 Systems
Connection Notes
Wired RJ-45 UTP Gigabit Ethernet on wall
behind the system.
Wireless Customer provides wireless access.
Table 2-10.
OL-27038-01