Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 312

Assembling a 4-Seat Second Row For a 10-Seat TX9200 System
Snap the microphone cable covers (callout 1) into the underside of the tables by squeezing the
Step 23
component as shown in
If you need to remove the covers, place your finger in the open edge of the cover and pull the cover out.
Tip
Note Figure 13-51
10-, 14-, or 18-seat system.
Key Part Description
1
Second row microphone cable cover
Figure 13-51 Placing the Microphone Covers Into the Underside of the Tables
Remove the protective film from the table legs.
Step 24
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-66
Chapter 13
Figure 13-51 and placing it into the cable slot.
shows a second row with six sections; however, this assembly step is the same for either a
Part Number
700-37828-xx
Kit # 69-2339-xx
Building the Second Row Table For a 14- and 10-Seat TX9200 System
Qty Ctn Notes
6 51
OL-27038-01