Assembling the Second Row Table
Connect the Power Distribution Units (PDUs) and power jumper cables by completing the following
Step 22
steps:
a.
b.
c.
Note
d.
Key
Part Description
1
PDU
2
M3 nut
3
Velcro straps
Figure 12-15
Placing the PDUs Into the Privacy Panel Channels
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
12-18
Assemble 2 PDUs (callout 1) into the privacy panels between legs F and G, and I and J, using 2 M3
nuts (callout 2) for each PDU.
Connect the power cables from legs F, G, and H to the PDU between legs F and G.
Connect the power cables from legs I, J, K, and E to the PDU between legs I and J.
Connect both outside leg PDUs (leg E and leg K) to the PDU between legs I and J; this method
ensures that each PDU has six connections.
Use the velcro straps to route the cables cleanly.
Part Number
74-8655-01
49-0376-xx
Kit # 69-2419-xx
Subkit # 53-3798-xx
52-0499-xx
Kit # 69-2403-xx
Subkit # 53-3789-xx
Chapter 12
Building the Second Row Table (TX9200 Systems Only)
Qty
Ctn
2
49,
50
4
47
70
6
Notes
Not shown in
Figure
12-15.
OL-27038-01