Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 263

Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
Assemble the power/Ethernet outlet assembly for the inside table legs by completing the following steps:
Step 15
a.
b.
Note
Key Part Description
1 Power/Ethernet outlets
2 Power/Ethernet outlet cover, front
3
M3 nut
4 Ethernet cable, 15 meter (49 feet)
OL-27038-01
Attach two power/Ethernet outlets (callout 1) into the front of the table leg cover (callout 2) using
eight nuts (callout 3).
Connect the Ethernet cables (callout 4) and, if applicable, the power jumper cables to the
power/Ethernet outlets.
Note the orientation of the power/Ethernet outlets; you can only install them in one orientation.
Part Number
See "Notes"
section.
700-37102-01
Kit #69-2350-xx
Except South
Africa (see Notes)
49-0833-xx
37-1402-xx
Kit # 69-2351-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling an 8-Seat Second Row For a 14-Seat TX9200
Qty Ctn Notes
6 54, 55, 56 Part number varies by
country. Refer to
Appendix C, "Region- and
Country-Specific Power
Cords and Table Leg Power
Connectors,"
part number.
5 51 The South Africa outlet cover
is specific to the outlet. Find
the covers with the
country-specific power
outlet.
40 Included with the
power/Ethernet outlet kit
10 48
for the correct
13-17