Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 239

Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Install the microphones by completing the following steps:
Step 31
a.
b.
Note
c.
Key Part Description
1 Microphone assembly
2 M4 x 30mm screw
Figure 12-24 Installing the Microphones Into the Table Tops
Feed the microphone wire through the channel
in the table over into the privacy panel bracket
OL-27038-01
Install the microphone assemblies (callout 1) with the mute button facing away from the 65-inch
displays, using 2 M4 x 30mm screws (callout 2).
Feed the microphone cable into the privacy panel bracket.
Make sure that the cable goes into the channel that is shown in
Assemble the other 5 microphones by repeating Steps
Part Number
74-10241-01
CTS-TX9K-MIC
N/A
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling the Second Row Table
Figure 12-24.
a. and b.
Qty Ctn Notes
6 67-72
12 Included with the
microphone kit
12-29