Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 58

Chapter 3 Installing the Wall-Mounted Reflector Wall Structure
Installing the Reflector to the Wall
(Optional) If you require access to outlets on the wall, remove the access panels on the reflector panels
Step 4
to provide access to the electrical outlets on the walls by removing eight screws on the reverse side of
the panel.
Note Be sure to follow all local, regional, and national electrical codes when you perform this step.
Figure 3-5 Removing the Access Panels (1 of 3): Cutout Measurements for Room Planning
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
3-6
OL-27038-01