Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 83

Chapter 4 Installing And Performing Initial Leveling of the Main Display Structure
Install the rear seismic brackets by completing the following steps:
Step 2
a.
Key Description
1
2
Figure 4-17 Position of Rear Seismic Bracket
OL-27038-01
Position one of the six rear seismic brackets parallel to the bottom bar of one of the three main
display pieces, on one of the rear levelling feet. It is important to position the rear seismic bracket
parallel to the bottom bar on the display frame so that the seismic bracket does not interfere with the
rear facade panel. See Figure 4-17
Rear facade panel
Rear seismic bracket
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Installing Seismic Brackets (Optional), Part Number CTS-TX9K-SEISMIC=
for more information on how to position a front seismic bracket.
4-19