Room Dimensions For The Tx9000 And Tx9200; Room Dimensions For The Tx9000 - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

Room Dimensions for the TX9000 and TX9200

Room Dimensions for the TX9000 and TX9200

The following section includes the required room dimensions for your TX9000 and 9200 system and
includes the following topics:
•
•

Room Dimensions for the TX9000

For the TX9000, rectangular rooms are preferred although irregular shaped rooms can also be
accommodated. The minimum, recommended, and maximum room sizes for a TX9000 system are
provided in
Table 2-3
Minimum
Recommended
Maximum
1. This measurement is for systems that have a wall-mounted reflector wall. For systems that have
Ceilings lower than 8' (2440 mm) will not physically support the height of the CTS endpoint reflector
Note
wall.
The minimum room dimensions are illustrated in
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
2-4
Room Dimensions for the TX9000, page 2-4
Room Dimensions For the TX9200, page 2-6
Table 2-3.
TX9000 Room Dimensions
Width
19' (5800 mm)
21'(6400 mm)
23' (7010 mm)
a free-standing reflector wall, increase the minimum depth to 15' (4570 mm).
Chapter 2 Room Requirements for the TX9000 and TX9200 Systems
Depth Height
14'4" (4370 8' (2440 mm)
1
mm)
18' (5490 mm) 10' (3050 mm)
31' (9450 mm) 10' (3050 mm)
Figure 2-1:
OL-27038-01