Chapter 8
Assembling the Electronic Hardware, Facade Brackets, Camera Assembly, and Cable Runner
Place the camera assembly into the center display structure and attach the assembly to the structure with
Step 14
4 M8 socket cap screws.
Center the bracket within the system, and make sure that you fully tighten the screws. Use a 6mm hex
Note
key or bit to tighten these screws.
Key
Part Description
1
Camera assembly
2
M8 x 20mm flange head, hex socket
cap screw
Figure 8-19
Installing the Camera Bracket
OL-27038-01
Part Number
800-369215-xx
48-2341-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty
Ctn Notes
1
29
4
29
Part of camera assembly kit
8-23