Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 86

Installing the Displays
Prepare the displays for installation by completing the following steps:
Step 1
a.
b.
c.
Do not use the DVI cable that is provided with the display. Use the cable that are provided with the
Caution
system. The part number is 37-1387-01 and they are in cable kits 1, 2, and 3 (69-2345-01, 69-2346-01,
and 69-2347-01, respectively). Use the power cable that is included with the display.
Note Tighten the spools and the spool studs securely to the display. Hand tighten the spool (do not overtighten
the spool).
Key Part Description
1 65-inch high-definition
display
2 Spool stud
3 M8 x 15.5 serrated washers
4 Spool
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
5-2
Chapter 5
Remove the handles from the rear of the display.
Remove the bracket from the rear of the display.
Attach the spool studs, washers, and spools to the display.
Part Number
CTS-DISP-65-GEN4 3
700-30916-01
Kit # 69-2066-01
49-1251-01
Kit #69-2066-xx
700-30783-01
Kit # 69-2066-01
Installing the Displays and Performing Final Leveling of the Main Display Structure
Qty Ctn
40, 41, 42
12 1
12 1
12 1
Notes
Included with spool stud kit
Included with spool stud kit
Included with spool stud kit
OL-27038-01