Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 39

Chapter 2 Room Requirements for the TX9000 and TX9200 Systems
The TelePresence TX9000 and TX9200 use Power Distribution Units (PDUs) to connect the components
to the power circuits. See
US electrical code requires a maximum of 16 amps on a 20 amp circuit.
Note
Table 2-14
PDU
PDU 1
PDU 2
PDU 3
PDU 4
Table 2-15
PDU
PDU 5
OL-27038-01
Table 2-14
Components and Total Power Usage in Watts per Power Distribution Unit (PDU)
Components
Power supply for LCU (1 of 2)
Codec TS2
Left display
Total watts: 837.6
Power supply for LCU (2 of 2)
Codec TS1
Audio/video extension unit
Presentation display
Camera processor module
Total watts: 630
Codec TS3
Right display
Total watts: 729.6
Codec TS4
Center display
Total watts: 729.6
Components and Total Power Usage in Watts per Power Distribution Unit (PDU) for
First and Second Row Conference Participants (Optional)
Components
Power supply for front row/first row conference participants (TX9000 and TX9200
systems)
Total watts: 1440
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Power Requirements For the TX9000 and TX9200
and Table 2-15 for the wattage that is required for each PDU.
2-13