Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 139

Chapter 8 Assembling the Electronic Hardware, Facade Brackets, Camera Assembly, and Cable Runner
Install the electronic equipment bracket between the left and center display by completing the following
Step 2
steps:
a.
b.
c.
Apply the compliance label to the bracket.
Step 3
Key Part Description
1 Electronic equipment bracket, center 700-37122-01
2 M4 x 16mm pan head screws
3 Compliance label
Figure 8-2 Installing the Electronic Equipment Bracket Between the Left and Center Display
OL-27038-01
Using a #2 screwdriver or driver bit, insert 6 screws into the structure but do not tighten them fully.
Use the keyhole feature on the bracket to slide the bracket over the screws.
Tighten the screws.
Part Number
Kit #69-2323-xx
48-3011-01
Kit # 69-2367-xx
47-25118-01
Kit # 53-3789--xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty Ctn Notes
1 1 Install this between the left
and center displays.
6 6
1 6
8-3