Connecting and Routing Cables in the Main Display Assembly
Figure 10-13
Front View of Main Display Frame Cable Routing
Figure 10-14
Rear View of Main Display Frame Cable Routing
You cannot add the cable for the Touch device, presentation cable, or microphone cable until you install
Note
the table tops. For instructions to connect and route these cables, see
Installation of the First Row Table."
Chapter 12, "Building the Second Row Table (TX9200 Systems Only)."
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
10-16
For additional instructions to route the second row cables, see
Chapter 10
Connecting and Routing the Cables
Chapter 11, "Completing
OL-27038-01