Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 233

Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Assemble table section C to the table sections A and B by completing the following steps:
Step 25
a.
b.
c.
d.
The images in
Note
Key Part Description
1
Second row table section C
Figure 12-18 Connecting Table Section C to Sections A and B
OL-27038-01
Position table section C (callout 1) beside table sections A and B.
Install four wooden biscuits (callout 2) into the slots; then, gently push the table sections together.
Position the 2 half-moon table joiners (callout 3) and tighten them to bring the tables together.
Attach two joint plates (callout 4) using 12 screws (callout 5).
Figure 12-18 are shown upside-down for clarity.
Part Number
700-37149-01
Kit #69-2301-xx or
69-2386-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling the Second Row Table
Qty Ctn Notes
1 73 Kit number depends on
type of table (maple or
walnut)
12-23