Resetting A Display - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

Chapter 17 Field-Replaceable Unit Guide

Resetting a Display

To reset one of the displays:
Remove two access panels behind display.
Step 1
See
Remove the rear panel behind the display.
Step 2
See
Turn off and then on the power switch, located next to the power inlet. See
information.
Figure 17-2 Location of Display Reset Button
OL-27038-01
Figure 15-16 for more information.
Figure 14-1, Figure 14-4, or
AC inlet
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Figure 14-5 for more information.
On/Off Switch Codec DMP
Resetting a Display
Figure 17-2 for more
17-9