Chapter 2
Installing the Cisco IP Conference Station 7936
Before You Begin
Package Contents
Network Requirements
OL-4746-01
Before you begin the installation of the IP Conference Station, review the
following sections:
"Package Contents" section on page 2-7
•
"Network Requirements" section on page 2-7
•
"Cisco CallManager Configuration" section on page 2-8
•
"Safety Notices" section on page 2-8
•
Review the following list to be sure that you have received all of the necessary
items to install the IP Conference Station.
One Cisco IP Conference Station 7936 unit
•
•
One 6-foot CAT 5 Cable
One 25-foot CAT 5 Cable
•
One Power Interface Module (PIM)
•
One Power Supply Unit (a country-specific power cord must be ordered
•
separately)
Optional External Microphone Kit (with two external microphones), ordered
•
separately
One Documentation Roadmap
•
One Cisco IP Conference Station 7936 Phone Guide
•
One Regulatory Compliance and Safety Information Guide
•
For the IP Conference Station to successfully operate as an IP conference station
endpoint in your network, your network must meet the following requirements:
Working VoIP (VoIP) Network
•
VoIP configured on your Cisco routers and gateways
–
Installing the Cisco IP Conference Station 7936
Cisco IP Conference Station 7936 Administration Guide
2-7