Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 106

Remove the support arm panel cutouts on the center reflector panel by removing eight screws on the
Step 11
reverse side of the panel.
Key Part Description
1 Reflector Panel, center
2 Support arm access panels
3 Screws
Figure 6-13 Removing the Support Arm Panel Cutouts
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
6-14
Chapter 6
Part/Kit Number Qty
700-36913-xx 1
Kit #69-2291
700-36914-xx 2
N/A 16
Installing the Free-Standing Reflector Wall Structure
Ctn Notes
43-A
Part of center reflector panel
Part of center reflector panel
OL-27038-01