Chapter 15
First-Time Setup
Add the camera cover faceplate and camera cover to the camera by completing the following steps:
Step 3
a.
Note
b.
Key
Part Description
1
Camera cover
2
M4 x 20 pan head screws
3
Camera cover faceplate
Figure 15-15
Attaching the Camera Cover and Faceplate to the Camera Bracket
OL-27038-01
Align the camera cover to the camera assembly and attach it with the four screws.
Be careful not to jar or move the camera lenses during this procedure.
Attach the magnetic camera cover faceplate to the front face of the camera cover.
Use the locating pins to correctly position the faceplate.
Part Number
700-37737-03
N/A
700-37827-01
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty
Ctn
Notes
1
3
Screws are pre-installed on
the cover
1
Setting Up CTS Components
15-21