Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 59

Chapter 3 Installing the Wall-Mounted Reflector Wall Structure
(Optional) remove the electrical access panels from the center, center-left and center-right reflector
Step 5
panels.
Be sure to follow all local, regional, and national electrical codes when you perform this step.
Note
Key Part Description
1 Access panel
2 Screws
Figure 3-6 Removing the Electrical Outlet Access Panels (2 of 3)
OL-27038-01
Part/Kit Number
N/A
N/A
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Installing the Reflector to the Wall
Qty Ctn Notes
1 Part of center reflector panel
8 Part of center reflector panel
3-7