Chapter 6
Installing the Free-Standing Reflector Wall Structure
(Optional) If you created any small dings or nicks in the light reflector panel(s) during installation, use
Step 22
the tube of putty, included in the carton in the light reflector package, to cover the dings or nicks.
Step 23
Insert the upper L brackets into the recessed pockets between the panels, then insert 16 M4 x 16mm flat
head screws and tighten the screws.
Key
Part Description
1
Upper L bracket
2
4 x 16mm flat head screws
Figure 6-27
Installing the Upper L Brackets Into the Wall Panels (1 of 2)
OL-27038-01
Part Number
Kit #69-2292-xx
Kit #69-2292-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty
Ctn
Notes
4
43-B
16
43-B
6-29