Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 237

Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Secure the table sections to the table legs by completing the following steps:
Step 29
a.
b.
c.
d.
e.
USE THE CORRECT M8 x 16mm SCREWS FOR THIS STEP.
Caution
shoulder washers. Using incorrect, longer screws can cause leveling problems with the table sections.
Key Part Description
1 M8 x 16mm pan head screws, black
Figure 12-22 Connecting the Table Sections to the Table Legs
OL-27038-01
Slide the table top to line up the two holes nearest the 65-inch displays on leg H.
Put in two screws (shown as callout 1a in
Loosely screw in the two screws nearest the 65-inch displays for each leg.
Insert the screws farthest away from the displays (shown as callout 1b in
legs.
Fully tighten the screws you inserted in Steps
Part Number
48-2430-01
Kit # 53-3798-01
Subkit # 69-2353-01
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling the Second Row Table
Figure 12-22), but do not fully tighten them.
a. through d.
The correct screws do not have
Qty Ctn Notes
42 47
Figure 12-22) for all table
12-27