Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 299

Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
Connect the Power Distribution Units (PDUs) and power jumper cables by completing the following
Step 13
steps:
a.
b.
c.
d.
Key Part Description
1 PDU
2 M3 nut
3 Velcro straps
Figure 13-41 Placing the PDUs Into the Privacy Panel Channels
OL-27038-01
Assemble 2 PDUs (callout 1) into each privacy panel, and 800-37781-xx and 800-37782-xx, using
M3 nuts (callout 2) for each PDU.
Connect the power cables from legs 800-37776-xx and 800-37777-xx to the left PDU.
Connect the power cables from leg 800-37778-xx to the right PDU.
Use the velcro straps to route the cables cleanly.
Part Number
74-4787-02
CTS-PWR-PDU
49-0376-xx
Kit # 69-2419-xx
Subkit # 53-3798-xx
52-0499-xx
Kit # 69-2403-xx
Subkit # 53-3789-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling a 4-Seat Second Row For a 10-Seat TX9200 System
Qty Ctn
2 49,
50
4 47
70 6
Notes
Not shown in
Figure 13-41.
13-53