Where To Go Next - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

Chapter 14 Completing Installation of the Main Display Structure
Figure 14-43 Installing the Rear Floor Runner Cover (2 of 2)

Where to Go Next

You zoom and focus the camera before you install the rest of the system parts. After you complete the
camera procedures in the
Setup,"
the outside system panels by completing the steps in the
Bezel, and Service Panels and Aligning the Rear Panels" section on page
OL-27038-01
"Setting Up the Cameras" section on page 15-9
you then attach the camera hood assembly, top bezel, and Service Panels and, if required, adjust
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
in Chapter 15, "First-Time
"Attaching the Camera Hood Assembly, Top
15-18.
Where to Go Next
14-47