Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 222

Assembling the Second Row Table
Assemble the power/Ethernet outlet assembly by completing the following steps:
Step 18
a.
b.
Note
Key Part Description
1 Power/Ethernet outlets
2 Power/Ethernet outlet cover, front
3
M3 nut
4 Ethernet cable, 15 meter (49 feet)
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
12-12
Attach two power/Ethernet outlets (callout 1) into the front of the table leg cover (callout 2) using
eight nuts (callout 3).
Connect the Ethernet cables (callout 4) and, if applicable, the power jumper cables to the
power/Ethernet outlets.
Note the orientation of the power/Ethernet outlets; you can only install them in one orientation.
Part Number
See "Notes"
section.
700-37102-01
Kit #69-2350-xx
Except South
Africa (see Notes)
49-0833-01
37-1402-01
Kit # 69-2351-xx
Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Qty Ctn Notes
10 54, 55, 56 Part number varies by
country. Refer to
Appendix C, "Region- and
Country-Specific Power
Cords and Table Leg Power
Connectors,"
part number.
5 51 The South Africa outlet cover
is specific to the outlet. Find
the covers with the
country-specific power
outlet.
40 Included with the
power/Ethernet outlet kit
10 48
for the correct
OL-27038-01