Table of Contents
Advertisement
Use & Care Guide
Revised: May 20, 2015, OL-27038-01
Maintaining the Tabletop
Caution
Waxing or rubbing the surface with any type of abrasive is not recommended.
•
•
•
•
Cleaning the Displays
Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is
particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which
a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same
type until the surface is dry.
Cleaning the Camera Lens
Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry
Caution
microfiber cloth. After cleaning, you will need to realign the camera.
OL-27038-01
For general daily care - use a dampened cloth with clean water.
To remove dirt - use a mild soap and water solution. Wipe off with clean water afterward to remove
the soap.
To remove ink marks - rub the stained area with a pencil eraser.
To polish the tabletop - use lemon oil.
Lemon oil is not recommended for daily use.
Note
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
16
C H A P T E R
16-1
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
