The Nbtstat Command; Nbtstat Command Syntax - Avaya CallPilot 201i Maintenance And Diagnostics

2. At the prompt, type arp with the required parameters (for example, arp -g
3. Press Enter.
4. Type Exit to exit the Command Prompt window.

The nbtstat command

The nbtstat command displays protocol statistics and current TCP/IP connections using NBT.

Nbtstat command syntax

The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n] [-R] [-r] [-S] [-s]
[interval]
Parameter
-a remotename
-A IP address
-c
-n
-R
-r
-S
-s
Avaya CallPilot® 201i Server Maintenance and Diagnostics
Result: The Command Prompt window appears.
200.286.0.32).
Result: The system runs the arp command.
Lists the remote computer's name table using its name.
Lists the remote computer's name table using its IP address.
Lists the contents of the NetBIOS name cache giving the IP address
of each name.
Lists local NetBIOS names. Registered indicates that the name is
registered by broadcast (Bnode) or WINS (other node types).
Reloads the LMHOSTS file after purging all names from the
NetBIOS name cache.
Lists name resolution statistics for Windows networking name
resolution. On a computer configured to use WINS, this option
returns the number of names resolved and registered through
broadcast or through WINS.
Displays both client and server sessions, listing the remote hosts by
IP address only.
Displays both client and server sessions, and attempts to convert
the remote host IP address to a name using the HOSTS file.
Description
The nbtstat command
December 2010 45