IF the power status LED
off
Interpreting the MPC slot LEDs
Introduction
There is an LED for each MPC slot on the 201i server.
MPC slot LED functions
The LEDs indicate two possible MPC slot states:
• The MPC is in use.
• It is safe to remove the MPC from the server.
Avaya CallPilot® 201i Server Maintenance and Diagnostics
is
Caution:
Risk of equipment damage or data loss
It is not safe to remove the server from the switch. The server
is in one of the following states:
• The server is in the operating system startup sequence.
• The server has completed the startup sequence and is
running.
You must courtesy down Avaya CallPilot, and then shut
down the operating system before you can remove the
201i server from the switch. For instructions, see
"Powering down the server" in the CallPilot Installation
and Configuration Task List. (NN44200-306)
THEN
Note:
Interpreting the MPC slot LEDs
December 2010
23