B: Assign The Time Zone - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Perform Initial DEFINITY AUDIX Administration
5. Move the cursor to the Month field and type the name (not the number) of
the current month.
6. Move the cursor to the Day of the Month field and type the two digits of the
current day of the month (not the day of the week). For example, type 08 if
the current date is April 8.
7. Move the cursor to the Year field and type the full four digits of the current
year.
8. Move the cursor to the Time field and type the current time in an hh:mm
format ( hh specifies the hour in military (24 hour) time, and mm specifies
the minutes).
9. With the cursor at the Synchronize to Switch field, type y
10. Press
11. Continue with
Task 5-1B: Assign the Time Zone
Use the information on
1. With the cursor on the DEFINITY AUDIX command line, type change
switch-time-zone and press
The system displays the Switch Time Zone screen
NOTE:
If the switch clock does not display the correct time, set the switch
clock before performing this task. See the appropriate switch
document for the procedure to set the switch clock.
(Enter) to save the changes.
F3
Task 5-1B.
Worksheet C-6 to perform this task.
.
RETURN
Issue 1
May 1999
5-4