Task 9-1: Add Two Test Subscribers; Subscriber Screen - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
7 Joint Acceptance Testing
Add Two Test Subscribers
Task 7-1: Add Two Test Subscribers
1. If you have not already done so, log into the DEFINITY AUDIX local
terminal as craft. See
2. Type add subscriber and press
The system displays the Subscriber screen.
Figure 7-1. Subscriber Screen
3. With the cursor in the Name field, type the name of the first test subscriber,
for example, test-1 or subscriber-1.
4. Move the cursor to the Extension field and type the extension of the first
test subscriber that you are using for the test.
Task 5-1A
NOTE:
The two test subscriber extensions used in this task must be
administered on the switch. See
adding subscribers to the switch. (You can add subscribers on the
switch using the Add Station screen.) The second test extension
must have the coverage path for the AUDIX set.
for the login procedure.
.
RETURN
Task 9-1 in Chapter 9
Issue 1
May 1999
7-2
for details on