Switch Translation; D: Run The Switch Translations Audit - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Perform Initial DEFINITY AUDIX Administration
5. Move the cursor to the ADDRESS RANGES fields, and fill in the starting
and ending switch extensions that will have coverage on this DEFINITY
AUDIX system.
6. For the remaining fields, change only the fields whose values on
Worksheet C-3
7. Press the
8. Continue with
Task 5-1D: Run the Switch Translations Audit
The switch translations audit examines and updates internal data used by the
switch interface.
This audit takes a few seconds. Run the audit as described below.
1. With the cursor on the DEFINITY AUDIX command line, type audit
switch-translations and press
The system displays the Audit Results screen:
are different from the default.
(Enter) function key to save the changes.
F3
NOTE:
If you are activating IMAPI, the LAN will not recognize the machine
name until you reboot the system in
Task 5-1D.
Task 5-1I.
.
RETURN
Issue 1
May 1999
5-7