Task 6-2: Creating The Hunt Group - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4 Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix
Creating the Hunt Group
Table 4-6. Circuit Pack Screen Entries
Field
Sfx
Name
3. Press
4. If the Code field does not display the correct emulation for the DEFINITY
AUDIX system, call the remote service center.
NOTE:
G3s Basic Business Package (BBP) Voice Mail Applications Option
The Voice Mail Applications Option is optional with the G3s Basic Business
Package (BBP). When a DEFINITY AUDIX system is purchased with a G3s
BBP, the Voice Mail Application Support Option field on the
System-Parameters Customer Option screen must be set to yes. This
activates the Leave Word Calling feature and the Linked Coverage Path
feature. If this field is not set to yes, call the remote support center which
will remotely set this field to yes. This field must be set to yes for the
DEFINITY AUDIX system to operate in DS Integration.
5. Continue with
Task 4-2: Creating the Hunt Group
Before you can administer voice ports for DEFINITY AUDIX, you must first create
a hunt group which you will later assign to each of the voice ports.
To create the hunt group:
1. Obtain the hunt group number from
2. At the switch administration terminal, enter add hunt-group number
where number is the number of the hunt group you obtained in
The Hunt Group screen displays.
Description
Suffix for the circuit pack identification code. This field should
be blank.
This display varies depending on the switch type and version.
or to exit the screen.
ENTER CANCEL
Task 4-2.
NOTE:
If you have not obtained a hunt group number, you can enter list
hunt group to find an available hunt group, or enter add hunt-group
next to assign the next available hunt group number.
Worksheet B-2.
Issue 1
May 1999
4-9
Step 1.