7400A Data Module Settings; 7400B Data Module Settings - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
H Terminal and Modem Settings
Modem Option Settings (for Port C Modems)

7400A Data Module Settings

In the set interface option menu, set the ANS ONLY? option to YES. Then select
the following options:
Option
BAUD RATE
ANS
BRK DISK
CI
CH
CTS
DCD
DSR
DTR
DTR
LL
REMLOOP
RI
RL
SIGLS DISC
TM
DONE
See 7400A Data Module User's Manual , 555-020-706, for instructions on how to
set options on the 7400A data module.

7400B Data Module Settings

Set the two dip switches located under the top panel of the 7400B data module
as follows:
SW1-1:
SW1-5: ON
See 7400B Plus Data Module User's Guide , 555-020-710, for instructions on how
to set options on the 7400B data module.
Setting
1200 and 9600
AUTO
LONG
OFF
OFF
ON
NORMAL
ON
50 Msec
FOLLOW
OFF
GRANT
ON
OFF
OFF
OFF
YES
— Set to ON if a telephone is not attached to the 7400B.
— Set to OFF if a telephone is attached to the 7400B.
Issue 1
May 1999
H-10