Worksheet C-2: Activate Imapi For The Audix Server Hardware (Lan) Options - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
C DEFINITY AUDIX System Administration Worksheets
Activate IMAPI for the AUDIX Server Hardware (LAN) Options
Worksheet C-2: Activate IMAPI for the
AUDIX Server Hardware (LAN)
Options
Date
Prepared By
Contact Telephone Number
The information you supply here will be input on the SYSTEM-PARAMETERS
IMAPI-OPTIONS screen during installation only if the customer purchased I
Message Manager.
Maximum Number of Enabled IMAPI
Sessions
Enable Check_new messages
Enable Deliver_ca_message
Enable Voice File Transfer
IMAPI Session Timeout
IMAPI IP Address
IMAPI Subnet Mask
Default Gateway IP Address
1. This number is supplied by the LAN manager or administrator. The address appear in the form
nnn.nnn.nnn.nnn , where each nnn can be a number between 0 and 255.
I Message Manager requires the following:
NTUITY
— A 10BaseT connection to the LAN
— Transmission Control Protocol/Internet Protocol (TCP/IP) between the
DEFINITY AUDIX server and the end-users' PCs.
— A 486-33MHz PC with 10 MB of free hard disk storage. The tutorial
requires an additional 10 MB of disk storage, if installed.
_________________________
_________________________
_________________________
Field
1
1
1
Default
32
n
n
n
5
Issue 1
May 1999
C-3
NTUITY
Desired
y
n
y