Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
G
Announcement Set Considerations and Installation
Customized Announcement and Fragments
Announcement Set Considerations
and Installation
This appendix describes customized announcement sets and fragments, and
includes procedures for installing additional language sets.
Customized Announcement and
Fragments
If the customer added or deleted announcements, contact Tier 3 engineers for
technical support. If the customer modified standard announcements, the
customer should consider the viability of using them in the upgrade. If the
standard announcement set was changed in R4.0, the modified announcements
may not make sense in the new context. To check the context, examine the
contents of the modified announcement and all fragments called by that
announcement. If the customer decides the modified announcement will work in
a meaningful way, it can then be copied to the announcement set being used.
Customer Modified and Added Fragments
It is possible the official fragment has changed and the customer's version may
not make sense each time and place the official fragment is used. If it can no
longer be used effectively, the customer should delete it from the *.cust directory.
If the customer desires to reuse the fragment, they must assign it to an unused
number in the 4000-4999 range reserved for customer use. It can then be copied
to the desired announcement set.
Announcement Set Identifiers
The following table lists the names assigned to representative announcement
sets available to DEFINITY AUDIX users. Note that names of the verbose
(standard) sets can be no longer than eight characters in length.
The names of these announcement sets are listed in the first column. These
names are also printed on the magneto-optical disk cartridge labels and are
listed on the several DEFINITY AUDIX screens such as Add Announcements and
Issue 1
May 1999
G-1
G