Generic Modems - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
H Terminal and Modem Settings
Modem Option Settings (for Port C Modems)
1. Connect the modem to a terminal (for example, the 715 BCT) with the
terminal speed set at 9600 bps.
2. Enter AT to get the OK prompt.
3. Enter the following string:
AT&F
This string initializes the modem to perform basic tasks with DEFINITY
AUDIX. When the DEFINITY AUDIX system boots up, it automatically
resets the remote modem initialization string with the value listed on the
System-Parameters Maintenance screen.
4. Refer to
Maintenance screen.
5. Enter the following value on this screen:
AT&F
6. Enable Auto Answer.
See the Paradyne user's manual for instructions to enable Auto Answer.

Generic Modems

DEFINITY AUDIX requires a modem (domestic or international) that supports the
features listed in
modem that includes these features.
Table H-6. Modem Features Required to Interface with DEFINITY AUDIX
Feature
Hayes command set
modem echoes keyboard
commands
Enable result code display
Display verbal result codes
NOTE:
The maximum modulation data rate must be set to 9600 bps when this
modem is connected to DEFINITY AUDIX.
ø ø
&W
Task 10-1 in Chapter
ø ø
E1X6Y &D2&T5\K1\Q
Table H-6. Use the table to create an initialization string for your
10, and access the System-Parameters
ø ø ø
%C "H S41=3S49=
Sportster Option
E1
Qø
V1
Issue 1
May 1999
H-7
ø ø
S55=1&W