Verify The Voice Port Configuration - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
F Migration Procedure
Verify the DEFINITY AUDIX Administration
Task F-10B: Verify the Voice Port Configuration
The DEFINITY AUDIX voice ports and extensions must reflect the new
configuration required by the migration.
1. With the cursor on the DEFINITY AUDIX command line, type change
voice-group and press
The system displays the Voice Group screen
.
Figure F-15. Change Voice-Group Screen
2. Verify that the port locations and extensions match those required for the
migration, and that the number of ports is correct for the new system.
3. If you moved the DEFINITY AUDIX circuit pack, change the port names to
identify the new port locations.
4. Press
5. Continue with
RETURN
NOTE:
DEFINITY AUDIX 4.0 supports a maximum of 12 voice ports with no
networking port, or 8 voice ports with1 networking port.
(Enter) to save the changes.
F3
Task F-10C.
.
Issue 1
May 1999
F-22