Terminate To Coverage Pts. With Bridged - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4 Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix
Defining the Call Coverage Path for Voice Ports
add coverage path 4
COVERAGE CRITERIA
Station/Group Status
Active?
Busy?
Don't Answer?
All?
DND/SAC/Go to Cover?
COVERAGE POINTS
Terminate to Coverage Pts. with Bridged Appearances? y
Point1: h150
Point4:
Figure 4-5. Example of a Voice Port Coverage Path Screen
2. Use the entries in the table below to complete the Coverage Path screen.
Table 4-9. Voice Port Coverage Path Screen Entries
Field
Coverage Path Number
Coverage Criteria
Station/Group Status
Active?
Busy?
Don't Answer?
COVERAGE PATH
Coverage Path Number: 4
Next Path Number: ___
Inside Call
n
n
n
y
n
Point2:
Point5:
Entry
Displays the coverage path number assigned to the
coverage path when the add coverage path command is
entered. This number should appear in the Coverage Path
field on all of the voice port Station screens.
The conditions that, when met, cause the call to redirect to
coverage.
Inside Call
n
n
n
Page 1 of 1
Linkage:
Outside Call
n
n
n Number of Rings: 2
y
n
Point3:
Point6:
Outside Call
n
n
n
Issue 1
May 1999
4-15
SPE A