Paradyne Comsphere Models 3810 And 3820; Paradyne Comsphere Model 3910 - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
H Terminal and Modem Settings
Modem Option Settings (for Port C Modems)
This string initializes the modem to perform basic tasks with DEFINITY
AUDIX. When the DEFINITY AUDIX system boots up, it automatically
resets the modem initialization string with the value listed on the
System-Parameters Maintenance screen
default value for this initialization string was designed to optimize the
performance of the US Robotics modem. This value is listed below:
4. Enable Auto Answer by turning the dip switch 5 setting to off.
The dip switches are located on the back of the modem. See the user's
manual for instructions to change the dip switch setting.

Paradyne Comsphere Models 3810 and 3820

The Paradyne Comsphere modem is shipped from the factory with default option
settings. Use the following procedure to change the settings when using this
modem with the DEFINITY AUDIX System.
1. Connect the modem to a terminal (for example, the 715 BCT) with the
terminal speed set at 9600 bps.
2. Enter AT to get the OK prompt.
3. Enter the following string:
AT&F
This string initializes the modem to perform basic tasks with DEFINITY
AUDIX. When the DEFINITY AUDIX system boots up, it automatically
resets the remote modem initialization string with the value listed on the
System-Parameters Maintenance screen.
4. Follow
Maintenance screen.
5. Enter the following value on this screen:
AT&F
6. Enable Auto Answer.
See the Paradyne user's manual for instructions to enable Auto Answer.

Paradyne Comsphere Model 3910

The Paradyne Comsphere modem is shipped from the factory with default option
settings. Use the following procedure to change the settings when using this
modem with the DEFINITY AUDIX System.
ø
AT&F E1X4&A3&B1&K
NOTE:
The maximum modulation data rate must be set to 9600 bps when this
modem is connected to DEFINITY AUDIX.
ø ø
&W
Task 10-1 in Chapter 10
ø ø ø
E1B X6Y &D2&T5\K1\Q
(Task 10-1
ø ø
&N6&U2S =1S13=1Y
to access the System-Parameters
ø ø ø
%C "H S41=3S49=
Issue 1
May 1999
H-6
in Chapter 10). The
ø ø
&W
ø ø
S55=1&W