E: Administer Voice Ports - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual
For g3i/g3s/g3vs/r5vs/r5si/prologix switches, tn2181 emulation, display set integration
Hide thumbs
Also See for DEFINITY AUDIX:
- Pocket reference (72 pages) ,
- Installation and upgrade (208 pages)
Table of Contents
Advertisement
Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5
Initial Definity AUDIX Administration
Perform Initial DEFINITY AUDIX Administration
Figure 5-4. Audit Results Screen
2. Press
3. When the audit is complete, proceed to
complete successfully, see DEFINITY AUDIX System — Maintenance
book, 585-300-121, to troubleshoot the problem.
4. Continue with
Task 5-1E: Administer Voice Ports
The voice ports and extensions that you administer in this task must match the
ports and extensions that you administered on the switch. See
the correct values.
!
CAUTION:
If you administered a digital networking port in
administer a maximum of 8 voice ports in this task, even if you administered
12 ports on the switch.
1. With the cursor on the DEFINITY AUDIX command line, type change
voice-group and press
(Enter) to begin the audit.
F3
Task
5-1E.
RETURN
Task
5-1E. If the audit does not
Chapter
.
Issue 1
May 1999
5-8
Worksheet B-1
for
4, you can only
Advertisement
Table of Contents
