Verifying The Port Ids Of The Voice Ports; Configuration - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
I Changing Switch Integrations, Port Emulations, and Number of Voice Ports
Changing from CL Integration — Analog to DS Integration — Digital
Removing Voice Ports
Before changing from one configuration to another, you need to first remove
existing voice ports on the switch.

Verifying the Port IDs of the Voice Ports

Verify the port identifications and port type of the voice ports.
1. At the switch administration terminal, enter list station extension count n
where extension is the first extension in the hunt group and n is the
number of voice ports.
The List Station screen appears.
list station 12001 count 16
Ext. Port Type
12001 A0501 2500
12002 A0502 2500
12003 A0503 2500
12004 A0504 2500
12005 A0505 2500
12006 A0506 2500
12007 A0507 2500
12008 A0508 2500
12009 A0509 2500
12010 A0510 2500
12011 A0511 2500
12012 A0512 2500
Figure I-1. Voice Port Stations
NOTE:
This command works only if the voice port extensions are in
sequence (for example, 55555, 55556, 55557, and so on). If you
created extensions that are not sequential, use the list station
extension command.
STATIONS
Name Room Data
Ext.
AUDIX 1
AUDIX 2
AUDIX 3
AUDIX 4
AUDIX 5
AUDIX 6
AUDIX 7
AUDIX 8
AUDIX 9
AUDIX 10
AUDIX 11
AUDIX 12
Cov. COR COS Cable Jack
Path
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
Issue 1
May 1999
I-4
Page 1