J: Run The Switch Names Audit - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Perform Initial DEFINITY AUDIX Administration
6. Once the reboot completes successfully, proceed to
reboot does not complete successfully, note the state indicated on the
LEDs, and see the corresponding troubleshooting procedures in
DEFINITY AUDIX System — Maintenance , 585-300-121, before
continuing.
Task 5-1J: Run the Switch Names Audit
The Switch Names audit uploads the names-to-extensions database from the
switch. The Switch Names audit could take from 5 minutes to 1 hour, depending
on the size of the database.
1. With the cursor on the DEFINITY AUDIX command line, type audit
switch-names and press
The system displays the Switch Names Audix screen.
Figure 5-10. Switch Names Audit Screen
2. Press
3. Press
RETURN
(Enter) to begin the audit.
F3
(Enter) again to have the audit run in the background.
F3
Task
.
Issue 1
May 1999
5-16
5-1J. If the