Task 9-4: Test The Local Area Network - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
7 Joint Acceptance Testing
Test The Local Area Network
5. When the test completes successfully, determine the next step:
Task 7-4: Test The Local Area Network
If possible, this task should be performed jointly with the customer's LAN system
administrator.
Acceptance tests for the AUDIX server are limited to performing internal
diagnostics of the server to the Lucent provided demarcation point. If a customer
representative is available, joint acceptance testing will include a test of the
customer's server, another AUDIX server, or a PC with or without I
Message Manager.
1. With the cursor on the DEFINITY AUDIX command line, type test lan and
press
The system displays the Test LAN Results screen.
If the following conditions are met, continue with
— AUDIX server hardware options have been purchased.
— IMAPI system parameters have been activated.
If Audix server options or IMAPI system parameters have not been
activated, go to Task
.
RETURN
7-5.
Issue 1
May 1999
7-6
Task 7-4.
NTUITY