Test Lan Results Screen - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
7 Joint Acceptance Testing
Test The Local Area Network
Figure 7-3. Test LAN Results Screen
2. Press
run.
3. If any of the individual tests fail, refer to DEFINITY AUDIX
System — Maintenance , 585-300-121 for information on troubleshooting
the LAN connection. If there are problems with the network itself, the LAN
system administrator must resolve these problems before proceeding with
this test.
4. To test if a connection can be made to an I
or other LAN node, at the DEFINITY AUDIX administration command line
type test lan dest followed by the IP numerical address (in the form
nnn.nnn.nnn.nnn ) on the screen then press
5. Press
If the connection is made, a UNIX ping is returned. The test takes
approximately 15 seconds. If the test fails, refer to DEFINITY AUDIX
System — Maintenance , 585-300-121 for information on troubleshooting
the LAN connection.
6. After the tests pass, continue
(Enter) to begin the tests. These tests takes up to 2½ minutes to
F3
(Enter).
F3
Message Manager user
NTUITY
RETURN
withTask 7-5.
Issue 1
May 1999
7-7
.