Worksheet B-4: Assign The Call Coverage Path; For Subscribers (Digital Port Emulation - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
B Switch Administration Worksheets
Assign the Call Coverage Path for Subscribers (Digital Port Emulation)

Worksheet B-4: Assign the Call Coverage Path

for Subscribers (Digital Port Emulation)

Date
Prepared By
Contact Telephone Number
The following information is required to define call coverage paths for
subscribers. Complete a copy of this worksheet for each different coverage path.
Coverage Path Number
Enter the number you want to identify the call coverage path for subscribers.
Coverage Criteria
Station/Group Status Active? (Inside Call/Outside Call)
Coverage Criteria
Busy? (Inside Call/Outside Call)
Coverage Criteria
Don't Answer? (Inside Call/Outside Call)
Coverage Criteria
All? (Inside Call/Outside Call)
SAC/Go to Cover? (Inside Call/Outside Call)
Next Path Number
If desired, enter the second path to which calls will be directed in case the
current path fails.
Number of rings
Enter the number of rings (1–99) you want before a call goes to coverage.
Three is recommended.
Coverage Points
For Point1, Point2, or Point3, enter h followed by the DEFINITY AUDIX
hunt group number.
_________________________
_________________________
_________________________
Issue 1
May 1999
B-9
[n/n]
[y/y]
[y/y]
[n/n]
[y/y]