Task F-8: Restore The Existing Data; Restore The Existing Data - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
F Migration Procedure

Restore the Existing Data

Task F-8: Restore the Existing Data

Once the system is running, you must restore the data you backed up in
F-5.
To restore the data:
1. At the DEFINITY AUDIX administration terminal, log in as craft.
2. With the cursor on the DEFINITY AUDIX command line, enter reset
system oa&m
The system displays the Reset System OA&M screen.
Figure F-12. Reset System OA&M Screen
3. Press
The system reboots and returns to the DEFINITY AUDIX login prompt.
(Enter).
F3
NOTE:
Do not log in at the first login prompt. The system displays the first
prompt then continues the reset. Wait until the system displays the
login prompt for several minutes before proceeding.
Issue 1
May 1999
F-17
Task