Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
I
Changing Switch Integrations, Port Emulations, and Number of Voice Ports
Changing from CL Integration — Analog to DS Integration — Digital
Adding the Voice Port Coverage Path
Add the voice port coverage path for digital port emulation. Refer to "Defining the
Call Coverage Path for Voice Ports" in
coverage path.
Changing Subscriber Stations
1. Enter change station extension for each subscriber station.
2. Change the LWC Reception field to the following:
3. Change the LWC Activation field to n
4. Set Coverage Msg Retrieval? to y
Refer to
Task 9-1
subscribers.
Disabling the Data Link
Disable the data link for the CL integration. The DS integration of the DEFINITY
AUDIX system does not use a data link.
1. At the switch administration terminal, enter change
communication-interface links
The switch displays the Interface Links screen.
2. Change the Enable field to n for the DEFINITY AUDIX system link.
msa-spe for G1 or G3i/G3s/G3vs/R5si/R5vs
in
Chapter 9
for further instructions on administering the
Chapter 4
for instructions on adding the
Issue 1
May 1999
I-8